Arduino Communications Using the netcat(nc) Utility

From Combustory
Revision as of 00:38, 8 September 2012 by Jvaughters (Talk | contribs)
Jump to: navigation, search


Why reinvent the wheel. I have seen very complicated methods for communicating with the Arduino, Including some I have made on my own. What I have recently found out is that the easiest way to communicate to the Arduino is using the existing tool netcat. It is soooooo simple and super powerful. You

Mini2440 or Embedded Systems

Embedded systems like the Mini2440, use Busy Box as a small utility package.

nc -f /dev/ttyUSB0
Personal tools
Your Ad Here
Your Ad Here